Related Experiment Video
Updated: Aug 14, 2026

Visualization of Low-Level Gamma Radiation Sources Using a Low-Cost, High-Sensitivity, Omnidirectional Compton Camera
Published on: January 30, 2020
Analysis of shielding materials in a Compton spectrometer applied to x-ray tube quality control using Monte Carlo
S Gallardo1, J Ródenas, G Verdú
1Departamento de Ingeniería Química y Nuclear, Universidad Politécnica de Valencia, Apartado 22012, E-46071 Valencia, Spain.
Abstract:
A realistic characterisation of the primary beam is very important for the quality control of X-ray tubes. The most accurate technique to assess the actual photon spectrum is X-ray spectrometry. Some difficulties arising in the spectrum determination can be avoided using a Compton spectrometer. Simulation models are useful tools to know the effect of some operational parameters, such as collimation of primary beam, relative position of focus and detector, and the influence of shielding materials. A simulation model has been developed using the MCNP code, based on the Monte Carlo method, in order to reproduce a commercial Compton spectrometer. In this work, the model developed is applied to analyse the influence on measurements of shielding materials present in the spectrometer.
Related Concept Videos
Atomic Emission Spectroscopy: Interference
Atomic Emission Spectroscopy: Lab
Atomic Absorption Spectroscopy: Interference
Spectral interference occurs when signals from other elements or molecules overlap with the analyte signal, falsely elevating or masking the analyte's absorbance. This interference can be corrected using Zeeman,...
