Related Experiment Video
Updated: Aug 13, 2026

Protocol for Relative Hydrodynamic Assessment of Tri-leaflet Polymer Valves
Published on: October 17, 2013
Performance of a novel pressure release valve for cuff pressure control in pediatric tracheal tubes
Alexander Dullenkopf1, Vera Bernet-Buettiker, Paolo Maino
1Department of Anaesthesia, University Children's Hospital, Zurich, Switzerland. alex.dullenkopf@kispi.unizh.ch
Background:
Acute and chronic hyperinflation of tracheal tube cuffs represents a persistent risk factor for airway damage in children when cuffed tracheal tubes are used. In order to overcome this particular risk, a cuff pressure (CP) pop-off valve has been designed to avoid CP exceeding 20 cmH(2)O.
Methods:
The performance of the novel pop-off valve has been evaluated in an in vitro set-up during slow and rapid air insufflation by a syringe or a CP manometer or inadvertent compression of the cuff pilot balloon while measuring cuff and tracheal wall pressure (WP) in ID 3.0 mm cuffed tracheal tubes. Steady-state performance was evaluated during nitrous oxide exposure of tracheal tube cuffs (ID 3.0 mm).
Results:
The novel CP pop-off valve avoided cuff hyperinflation during rapid air volume changes and showed reliable performance during steady-state nitrous oxide exposure to the tube cuff.
Conclusions:
These preliminary results show that the CP pop-off valve limits the effect of rapid, potentially dangerous manual cuff inflation maneuvers and reliably prevents CP exceeding the predetermined level of 20 cmH(2)O when exposed to nitrous oxide.
Related Concept Videos
Ventilatory Modes
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Tracheostomy: Procedure and Tubes
Tracheostomy tubes can be made of semiflexible plastic (polyurethane or silicone), rigid plastic, or metal, and they come in...
Oxygen Delivering System III: Tracheostomy and T-piece
Tracheostomy
A tracheostomy is a surgically created opening (stoma) in the anterior part of the trachea. It is used to establish a patient airway, bypass an upper airway obstruction, simplify the removal of secretions, permit long-term...
Cardiopulmonary Resuscitation II: ACLS Airway Management
Pressure Relationships in Thoracic Cavity
Breathing Mechanisms
Both intra-alveolar and intrapleural pressures rely on specific lung properties. The ability to breathe—allowing air to enter the lungs during...
