Related Experiment Video
Updated: Aug 13, 2026
Preoxygenation Techniques for Tracheal Intubation in Critically Ill Adults Utilizing Oxygen Mask and Noninvasive Ventilation
Published on: December 5, 2025
Inspired oxygen fraction achieved with a portable ventilator: determinant factors
1Respiratory Dept., Hospital de la Santa Creu i Sant Pau, Sant Antoni M(a) Claret 167, 08025 Barcelona, Spain. dsamolski@hsp.santpau.es
Introduction:
Non-invasive positive pressure ventilation (NIPPV) is an effective treatment in respiratory failure. Continuous positive pressure (CPAP) may also be useful in acute hypoxaemic patients. Supplementary oxygen is usually necessary in both systems. However, the inspired oxygen fraction (FiO2) delivered by a NIV portable ventilator is unknown. The main objectives of this study were to establish the maximal FiO2 that could be achieved by these devices and to analyse the FiO2 determinant factors.
Method:
Ten healthy volunteers were evaluated using a BiPAP ST30 ventilator (Respironics, USA) with a single-limb circuit, expiratory port and nasal mask (Respironics, USA). Oxygen (15 L/min) was administered at two connection points (proximal and distal). Each volunteer carried out a NIPPV (inspiratory pressure 20 cmH2O [1.95 kPa]-expiratory pressure 8 cmH2O [0.78 kPa]) and a CPAP (10 cmH2O [0.981 kPa]) session. FiO2 was analysed by a probe located in the mask. Minute volume (MV) was measured using a pneumotachograph.
Results:
Maximal FiO2 was obtained with CPAP and distal oxygen connection point (67.39 +/- 15.39%). NIPPV achieved higher MV than CPAP. FiO2 was inversely correlated with MV.
Conclusions:
FiO2 obtained while using a NIPPV portable ventilator depends on the ventilatory assistant mode, the oxygen connection point and the MV reached.
More Related Videos
04:16Inspiratory Muscle Training as an Adjunct to the Treatment of Weaning Failure in Critically Ill Patients: A Practical Guide
Published on: January 30, 2026
05:46A Novel Inhalation Mask System to Deliver High Concentrations of Nitric Oxide Gas in Spontaneously Breathing Subjects
Published on: May 4, 2021
Related Concept Videos
01:19Factors Affecting Pulmonary Ventilation
Alveolar Surface Tension
The alveolar fluid lines the luminal surface of the alveoli and exerts a force called surface tension. This force is caused by the polar water molecules in the liquid being more strongly attracted to each...
01:16Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
01:29Mechanical Ventilation I: Indication and Settings
01:23Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
01:26Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
01:20Assessment of Ventilation I: Respiratory Rate
A Ventilation assessment is critical for monitoring a patient's health status. Respiration, one of the most accessible vital signs, provides insights into the function of numerous body systems and can indicate serious health issues, such as brainstem injuries from head trauma.
Critical Guidelines for Assessing Ventilation: