Related Experiment Video
Updated: Aug 11, 2026

Study of Experimental Organ Donation Models for Lung Transplantation
Published on: March 15, 2024
[HME filter versus patient-related replacement of tubes from the ventilation circuit for anaesthesia: a cost-benefit
R Kranabetter1, M Leier, D Kammermeier
1Institut für Klinikhygiene, Medizinische Mikrobiologie und Klinische Infektiologie, Klinikum Nürnberg, Germany. r.kranabetter@klinikum-nuernberg.de
Abstract:
Procedure-related costs were calculated for an operating theatre with 10 operating rooms. The variable parameter was the different hygiene regimens for the preparation of the anaesthesia circuit. In April 2003 a change was made for the whole anaesthesia area. Either change of the anaesthesia tube system after every patient or the use of a hydrophobic HME-F (heat and moisture exchange filter) with daily or weekly change of the anaesthesia tube system were calculated. All costs were ascertained on real findings and typical procedures. Data according to safety and hygienic value were discussed and supplemented by our own findings about perioperative pneumonia. The additional costs for the HME-F are covered by the savings for CO(2) lines and the reduction of reprocessing expenses and overall material costs were reduced. The operational work on anaesthesia machines decreased considerably. Combined cost types revealed savings up to 9,72 EUR for a single anaesthesia procedure. Filtration of the respiratory gases for particles, bacteria, viruses and airway climatisation is an additional positive effect of HME-F use. Incidence of postoperative pneumonia on intensive care units was monitored by KISS (German hospital infection surveillance system) and the change to the HME-F regimen did not indicate a higher risk of infection. By the implementation of a weekly change of the anaesthesia tube system using HME filters a hygienic management for anaesthesia circuit reprocessing was found which could mobilize considerable resources.
Related Concept Videos
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Tracheostomy: Procedure and Tubes
Tracheostomy tubes can be made of semiflexible plastic (polyurethane or silicone), rigid plastic, or metal, and they come in...
Oxygen Delivering System III: Tracheostomy and T-piece
Tracheostomy
A tracheostomy is a surgically created opening (stoma) in the anterior part of the trachea. It is used to establish a patient airway, bypass an upper airway obstruction, simplify the removal of secretions, permit long-term...
Mechanical Ventilation I: Indication and Settings
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation (NIPPV)
Tracheostomy Decannulation
Description of the Procedure
Decannulation refers to the permanent removal of the tracheostomy tube, signaling the resolution of the condition that initially necessitated the tracheostomy. The process requires a well-coordinated interplay between...

