Related Experiment Video
Updated: Aug 11, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Fluoride wastewater treatment by adsorption onto metallurgical grade alumina
1ENEA, CR Casaccia - Via Anguillarese 301, 00060 Rome, Italy. pietrelli@casaccia.enea.it
Abstract:
The adsorption of fluoride onto metallurgical grade alumina (to produce Al) was investigated under different conditions: pH, contact time and adsorbent concentration. Data were evaluated with the aim of developing an alternative treatment technology for washing wastewater arising from an Aluminum can production plant. Kinetics and adsorption isotherms data have been also produced Sorption is greatly affected by pH and the best condition for fluoride removal are obtained at pH 5-6 and alkalinity competes successfully with fluoride ions for the exchange sites. Experiments with fixed beds indicate that fluoride is removed from wastewater by metallurgical-grade alumina with a capacity of 12.21 mg of F per gram and adsorption increases of about 25% at appropriate pH. The Mass Transfer Zone at 5% of the breakthrough occupies 70.6% of the total column length. The optimization of aluminum precipitation by pH adjustment and with different precipitant agents has been done.
More Related Videos
08:21Optimized Procedure for Determining the Adsorption of Phosphonates onto Granular Ferric Hydroxide using a Miniaturized Phosphorus Determination Method
Published on: May 18, 2018
05:52Resource Recycling of Red Soil to Synthesize Fe2O3/FAU-type Zeolite Composite Material for Heavy Metal Removal
Published on: June 2, 2022
Related Concept Videos
Coagulation
Biological Treatment of Effluent and Waste Water
Microbial Bioremediation of Uranium
Microbial Leaching