Continuous monitoring in sewer networks an approach for quantification of pollution loads from CSOs into surface...

Different approaches for quantification of pollution loads discharged from combined sewer networks into surface water bodies have been observed over the last few years and decades, but a large number of unresolved problems still remain. Many monitoring campaigns have been based on manual or automated spot sampling - with the long known limitations of this method such as sampling errors and errors due to sample conservation, transport and preparation. On the other hand, only recently have sensors became available which are suitable for continuous application in sewer networks. A large number of practical problems still have to be solved before continuous monitoring in sewer networks will be successful. Additionally, most of the applicable sensors are based on surrogate methods which results in a considerable effort for reference measurements for sensor calibration. Finally, it has to be considered that, depending on the sewer network topography, deposition and remobilisation of pollutants varies considerably, which limits the generality of monitoring results and, subsequently, their applicability as a base for the design of storm water tanks or combined sewer overflows (CSO). A monitoring station for continuous monitoring of load discharges from a CSO has been installed and operated for more than one year. The design and equipment of the measurement station, operational experiences and results are given in this paper.