Characterisation of stationary phases in subcritical fluid chromatography with the solvation parameter model. III....

In this third paper, varied types of polar stationary phases, namely silica gel (SI), cyano (CN)- and amino-propyl (NH2)-bonded silica, propanediol-bonded silica (DIOL), poly(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA), were investigated in subcritical fluid mobile phase. This study was performed to provide a greater knowledge of the properties of these phases in SFC, and to allow a more rapid and efficient choice of polar stationary phase in regard of the chemical nature of the solutes to be separated. The effect of the nature of the stationary phase on interactions between solute and stationary phases and between solute and carbon dioxide-modifier mobile phases was studied by the use of a linear solvation energy relationship (LSER), the solvation parameter model. The retention behaviour observed with sub/supercritical fluid with carbon dioxide-methanol is close to the one reported in normal-phase liquid chromatography with hexane. The hydrogen bond acidity and basicity, and the polarity/polarizability favour the solute retention when the molar volume of the solute reduces it. As with non-polar phases, the absence of water in the subcritical fluid allows the solute/stationary phase interactions to play a greater part in the retention behaviour. As expected, the DIOL phase and the bare silica display a similar behaviour towards acidic and basic solutes, when interactions with basic compounds are lower with the NH2 phase. On the CN phase, all interactions (hydrogen bonding, dipole-dipole and charge transfer) have a nearly equivalent weight on the retention. The polymeric phases, PEG and PVA, provide the most accurate models, possibly due to their better surface homogeneity.