Related Experiment Video
Updated: Aug 10, 2026

Bergmeyer Glucose Quantification for Microbiological Samples
Published on: January 17, 2025
Comparison between transmittance and reflectance measurements in glucose determination using near infrared
Kye Jin Jeon1, In Duk Hwang, Sangjoon Hahn
1Samsung Advanced Institute of Technology, Suwon, South Korea.
Abstract:
Glucose determination based on near-IR spectroscopy is investigated for reflectance and transmittance measurement. A wavelength range is 1100 to 2500 nm, which includes both the combination and overtone bands of glucose absorption. Intralipid solutions are used as samples, where glucose concentrations vary between 0 and 1000 mg/dl. Sample thickness for reflectance is 10 cm and 1- and 2-mm-thick samples are used for transmission. Partial least-squares regression (PLSR) analyses are performed to predict glucose concentrations. The standard errors of calibration are comparable between reflectance and 2-mm-thick transmittance. The reflectance method is inferior to the transmittance method in terms of the standard errors of prediction. Loading vector analysis for reflectance does not show glucose absorption features. Reflected light may not have enough information of glucose since a major portion of detected light has a short optical path length. In addition, prediction becomes more dependent on medium scattering rather than glucose, compared with transmission measurement. Loading vectors obtained from a PLSR transmittance analysis have glucose absorption profiles. The 1-mm-thick samples give better results than the 2-mm-thick samples for both calibration and prediction models. The transmittance setup is recommended for noninvasive glucose monitoring.
More Related Videos
Related Concept Videos
Spectrophotometry: Introduction
The essential components of a spectrophotometer include a source of electromagnetic radiation, a slot for placing a material to be analyzed, and a...
IR Spectrum
Transmittance is defined as the ratio of the radiant power passing through a sample to that from the radiation's source. Multiplying the transmittance by 100 gives the percent transmittance (%T), which varies between 100% (no absorption) and 0% (complete...
Attenuated Total Reflectance (ATR) Infrared Spectroscopy: Overview
The ATR process begins by directing a beam...
UV–Vis Spectrometers

