A novel device for measuring long-term oxygen therapy adherence: a preliminary validation
Sun-Kai V Lin1, Samuel T Kuna, Daniel K Bogen
1Department of Bioengineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, USA. sunkai.lin@gmail.com
Introduction:
Current methods for measuring patient adherence to long-term oxygen therapy fail to measure the actual amount of time the patient is inhaling oxygen and the pattern of oxygen use within the day. We have developed a novel oxygen-adherence monitor to address these limitations, and this report introduces the monitor and provides preliminary data validating its use.
Methods:
This battery-powered monitor attaches to the oxygen source and detects respiratory-related pressure fluctuations transmitted through the nasal cannula. The monitor takes a measurement over a 25-second period, at 4-min intervals. It detects and stores data on 4 different states that describe the patient's actual use of the oxygen source and nasal cannula: source-off/cannula-off, source-off/cannula-on, source-on/cannula-off, and source-on/cannula-on. We studied the monitor's performance with 10 patients with chronic obstructive pulmonary disease, during a directly-observed sequence of using and not using supplemental oxygen via nasal cannula, while sitting and walking.
Results:
The monitor correctly detected 122 out of 129 measurements among all participants, yielding a 95\% detection accuracy.
Conclusion:
A monitor that objectively measures oxygen inhalation, rather than oxygen expenditure, may help improve the management of patients on long-term oxygen therapy.
Related Concept Videos
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Guidelines For Measuring Vital Signs
Before taking a patient's vital signs, a nurse would consider and assess the patient's comfort level and ensure appropriate equipment is available.
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
Administering Oxygen by Nasal Cannula
Nasal Cannulas
A nasal cannula is a lightweight tube split into two prongs placed in the nostrils, connected...
Administering Oxygen by Mask
Administering oxygen by mask is a common nursing intervention that provides supplemental oxygen to patients with respiratory distress or chronic lung conditions. This procedure involves delivering oxygen at a specified rate through a face mask connected to an oxygen source.
Equipment
The equipment necessary for this procedure includes:
Special considerations while measuring oxygen saturation
Ensuring accuracy in vital sign recordings while prioritizing patient comfort and minimizing anxiety is important.


