Development and calibration of a nitrification PDE model based on experimental data issued from biofilter treating...

To remove ammonia for production of drinking water, nitrification can be performed in a bio-filter. At least 1 month is necessary to capture from the groundwater and then grow a sufficient amount of nitrifying bacteria to reach the desired removal efficiency. Improving start-up of bio-filters at low substrate concentration is therefore a major challenge. In this connection, it is important to develop appropriate models for designing, monitoring or analysing biofilm systems during start-up or following disinfection events. This study discusses the development and calibration of a nitrification PDE model which reflects the compromise between the complexity associated with the description of the full physical and biochemical mechanisms and the search for a simplified model with identifiable parameters. This model takes only the relevant phenomena (considering the full operating range) into account. The validity of the calibrated model has been evaluated through experiments under very different operational conditions, at the laboratory and under real industrial conditions, involving the full upstream chain of water treatment (iron oxidation and sand filter).