Related Experiment Video
Updated: Aug 9, 2026

A Computational Modeling Approach to Investigate the Influence of Hyperthermia on the Tumor Microenvironment
Published on: December 1, 2023
The modeling of the radiation and response green's function of a fluid-loaded cylindrical shell with an external
1Lockheed Martin MS2, Perry Technologies, Riviera Beach, Florida 33404, USA.
Abstract:
Scattering and radiation of acoustic waves from a fluid-loaded cylindrical shell with an external compliant layer are of interest. The compliant layer can be modeled by a normally reacting impedance layer, which has the advantage that complex compliant layer geometries, such as partial compliant layers, can be considered. A question may, however, arise as to the accuracy of this approach. A more rigorous approach is to model the elastic shell and compliant layer using a multilayer shell theory, which has the disadvantage that it cannot be extended to consider partial layers. In this paper scattering results from the normally reacting compliant layer model are compared to those from the multilayer shell model to show that the two approaches produce similar results, except for thickness resonances of the compliant layer. Having established the consistency between the two approaches, results for the far-field acoustic radiation as a function of frequency and radiation angle for a fluid-loaded shell with an external compliant layer excited by an internal ring force are obtained using the normally reacting impedance layer model. These results clearly show the reduction in the far field radiation due to the presence of the compliant layer.
More Related Videos
Related Concept Videos
Fluid Pressure over Curved Plate of Constant Width
Pressure of Fluids
Pressure Variation in a Fluid at Rest
When measuring pressure at two different levels within the fluid, the difference in pressure...
Hydrostatic Pressure Force on a Curved Surface
Fluid Pressure over Flat Plate of Constant Width
The resultant force...
Fluid Pressure over Flat Plate of Variable Width
The pressure distribution on the plate can be calculated by determining the force that acts on a differential area strip of the plate. Thus, the magnitude of the force is equal to the...

