Related Experiment Video
Updated: Aug 8, 2026

Towards Biomimicking Wood: Fabricated Free-standing Films of Nanocellulose, Lignin, and a Synthetic Polycation
Published on: June 17, 2014
Negative Poisson ratio of crystalline cellulose in kraft cooked Norway spruce
Marko Peura1, Ingo Grotkopp, Henrik Lemke
1Department of Physical Sciences, Division of X-ray Physics, P.O. Box 64, FI-00014 University of Helsinki, Finland.
Abstract:
The tensile properties of kraft cooked Norway spruce were studied by tensile testing with in situ X-ray diffraction (XRD). Samples were of earlywood, cooked for varying times. The total lignin content of the samples was between 21.7% and 9.3%. Tensile tests with XRD were performed on wet samples, without XRD on dry samples. The tensile strength, the modulus of elasticity (MOE), and the elongation at fracture/yield were determined. X-ray diffraction was used to determine the microfibril angle (MFA) and the deformation of crystalline cellulose by monitoring the reflections 200 and 004. The (X-ray) Poisson ratio of crystalline cellulose was calculated, both before and after the yield point. The tensile strength and the MOE of the wet samples were significantly lower than in the dry samples. The tensile properties of dry samples were similar to dry earlywood samples of untreated Norway spruce. The MFA only showed notable changes due to strain when it was initially large, when a diminishing effect was observed. The Poisson ratio of crystalline cellulose was negative. The average values ranged between -0.26 and -1.17 before the yield point and between -0.86 and -1.05 after the yield point.
More Related Videos
11:32Highly Stable, Functional Hairy Nanoparticles and Biopolymers from Wood Fibers: Towards Sustainable Nanotechnology
Published on: July 20, 2016
07:25Green and Low-cost Production of Thermally Stable and Carboxylated Cellulose Nanocrystals and Nanofibrils Using Highly Recyclable Dicarboxylic Acids
Published on: January 9, 2017