Compact forceps manipulator using friction wheel mechanism and gimbals mechanism for laparoscopic surgery

This paper reports evaluation of compact forceps manipulator designed for assisting laparoscopic surgery. The manipulator consists of two miniaturized parts; friction wheel mechanism which rotates and translates forceps (62 x 52 x 150[mm3], 0.6 [kg]), and gimbals mechanism which provides pivoting motion of forceps around incision hole on the abdomen (135 x 165 x 300 [mm3], 1.1 [kg]). The four-DOF motion of forceps around the incision hole on the abdomen in laparoscopic surgery is realized. By integration with robotized forceps or a needle insertion robot, it will work as a compact robotic arm in a master-slave system. It can also work under numerical control based on the computerized surgical planning. This table-mounted miniaturized manipulator contributes to the coexistence of clinical staffs and manipulators in the today's crowded operating room. As the results of mechanical performance evaluation with load of 4 [N], positioning accuracy was less than 1.2 [deg] in pivoting motion, less than 4 [deg] in rotation of forceps, less than 1.2 [mm] in longitudinal translation of forceps. As future works, we will modify mechanism for sterilization and safety improvement, and also integrate this manipulator with robotized forceps to build a surgery assisting robotic system.