Selected morphological and functional properties of extruded acetylated starch-cellulose foams

Starch acetates with degrees of substitution (DS) of 1.68 and 2.3 were extruded with 10%, 20% and 30% (w/w) cellulose and 20% (w/w) ethanol in a twin screw extruder at 150, 160 and 170 degrees C barrel temperatures and 170, 200 and 230 rpm screw speeds. X-ray diffractogram (XRD), differential scanning calormetry (DSC) and Fourier transform infrared spectroscopy (FTIR) were used to analyze the morphological properties of extruded foams. A central composite response surface design was applied to analyze the effects of starch type, cellulose content, barrel temperature and screw speed on specific mechanical energy requirement of extruding foams and the radial expansion ratio and compressibility of the extruded foams. XRD showed losses of DS starch and cellulose crystallinity and the formation of new complexes. FTIR spectra revealed that functional groups and chemical bonds were maintained after extrusion. Melting temperatures changed significantly when higher DS starch acetate was used. Cellulose content, barrel temperature and screw speed showed significant effects on thermal, physical and mechanical properties of extruded foams and the specific mechanical energy requirement.