Use of biosurfactant to remediate phenanthrene-contaminated soil by the combined solubilization-biodegradation...

The applicability of the combined solubilization-biodegradation process was examined using soil-packed column. In the solubilization step, 50 pore volumes of 150 mg/l biosurfactants solution was injected and the percentage removal of phenanthrene (mg) was 17.3% and 9.5% from soil with pH 5 and 7, respectively. The highest solubility was detected at pH 5 and this result confirmed that adjusting the pH of the biosurfactants solution injected could enhance the solubility of phenanthrene. Following this, soil samples were completely transferred to batches and incubated for 10 weeks to monitor phenanthrene degradation. The phenanthrene concentration in the soil samples decreased significantly during the biodegradation step in all soil samples, except for the soil sample that was flushed with biosurfactants solution with pH 4. This indicated that the degradation of contaminants by specific species might not be affected by the residual biosurfactants following application of the solubilization process. Moreover, these results suggested that the biosurfactant-enhanced flushing process could be developed as a useful technology with no negative effects on subsurface environments and could be combined with the biodegradation process to increase the removal efficiency.