Related Experiment Video

Updated: Aug 7, 2026

Measuring Light-Switching Behavior Using an Occupancy and Light Data Logger
05:50

Measuring Light-Switching Behavior Using an Occupancy and Light Data Logger

Published on: January 16, 2020

Effects of television modeling on residential energy conservation

R A Winett1, I N Leckliter, D E Chinn

  • 1Virginia Polytechnic Institute and State University.

Journal of Applied Behavior Analysis
|April 1, 1985
PubMed

Related Concept Videos

Electrical Energy01:10

Electrical Energy

Using electric appliances for a longer period of time consumes more electrical energy and results in a higher electric bill. The energy produced by the transfer of electrons from one point to another is known as electrical energy. If power is delivered at a constant rate, the electrical energy can be defined as the product of power used by the device for a period of time. The energy unit on electric bills is the kilowatt-hour, where one kilowatt-hour is equivalent to 3.6 × 106 joules. The...
Modeling in Therapy01:26

Modeling in Therapy

Modeling, a key technique in therapy, uses observational learning to help clients acquire and practice new skills by watching therapists demonstrate desired behaviors. This approach, rooted in Albert Bandura's concept of vicarious learning, plays a significant role in therapeutic interventions for various psychological conditions, including social anxiety, ADHD, and depression.
Participant Modeling
Participant modeling involves therapists demonstrating calm and effective behaviors in situations...
Conservation of AC Power01:15

Conservation of AC Power

The principle of power preservation is applicable to both ac and dc circuits. This principle, when applied to AC power, asserts that the complex, real, and reactive powers produced by the source are equal to the total complex, real, and reactive powers absorbed by the loads. When two load impedances are connected in parallel to an ac source V, the complex power provided by the source can be calculated using the relation
Conservation of Energy: Application01:12

Conservation of Energy: Application

When solving problems using the energy conservation law, the object (system) to be studied should first be identified. Often, in applications of energy conservation, we study more than one body at the same time. Second, identify all forces acting on the object and determine whether each force doing work is conservative. If a non-conservative force (e.g., friction) is doing work, then mechanical energy is not conserved. The system must then be analyzed with non-conservative work. Third, for...
Energy Losses in Transformers01:21

Energy Losses in Transformers

In an ideal transformer, it is assumed that there are no energy losses, and, hence, all the power at the primary winding is transferred to the secondary winding. However, in reality,  the transformers always have some energy losses, and, hence, the output power obtained at the secondary winding is less than the input power at the primary winding due to energy losses.
There are four main reasons for energy losses in transformers.
The first cause can be  the high resistance of the copper windings...
Energy Balance01:19

Energy Balance

The human body gets energy from the three macronutrients: carbohydrates, proteins, and fats. Energy is released when the chemical bonds in the organic compounds present in the food are broken down. The energy content of food is measured in kilocalories (kcal), defined as the amount of heat required to raise the temperature of one kilogram of water by one degree Celsius. This value is determined by measuring the temperature change of the water surrounding a calorimeter after the complete...