Related Experiment Video
Updated: Aug 7, 2026
Diffusion Tensor Magnetic Resonance Imaging in Chronic Spinal Cord Compression
Published on: May 7, 2019
3D imaging of the whole spine at 3T compared to 1.5T: initial experiences
E A Rodegerdts1, A Boss, K Riemarzik
1Department of Diagnostic Radiology, University of Tübingen, Germany. Enno.Rodegerdts@uni-tuebingen.de
Purpose:
To describe our first experiences with a recently introduced 3T system for T2-weighted isotropic 3D whole-spine imaging.
Material And Methods:
Magnetic resonance imaging of the whole spine was performed by implementing an isotropic 3D fast spin-echo sequence with variable flip-angle refocusing pulses at 3T and 1.5T. Signal-to-noise ratio (SNR) was compared on both systems in eight subjects.
Results:
Mean values for SNR were significantly higher at 3T (346+214) for 1.0 mm voxel size compared to 1.5T (202 +/- 41), but showed considerably higher variability at 3T. At 3T, measurements with 0.9 mm voxel size were possible with similar SNR as with 1.0 mm voxel size at 1.5T.
Conclusion:
High-resolution 3D imaging of the whole spine is feasible at 3T with an increased SNR compared to 1.5T. Signal gain at 3T can be used to further increase spatial resolution. Pronounced interpatient variability of SNR at 3T may be a result of inhomogeneous RF deposition due to dielectric effects.
Related Concept Videos
01:14Imaging Studies I: CT and MRI
Description of the Procedures
Computed Tomography (CT) scan:
Computed Tomography (CT) scans use X-ray technology to generate detailed images of bones, organs, and tissues. During the scan, the patient lies on a moving table...
01:10Computed Tomography
The technique was invented in the 1970s and is based on the principle that as X-rays pass through the body, they are absorbed or reflected at different levels. In the technique, a patient lies on a motorized platform while a computerized axial tomography (CAT) scanner rotates...