Related Experiment Video
Updated: Aug 7, 2026

Procedure to Evaluate the Efficiency of Flocculants for the Removal of Dispersed Particles from Plant Extracts
Published on: April 9, 2016
Improvement of paint effluents coagulation using natural and synthetic coagulant aids
M A Aboulhassan1, S Souabi, A Yaacoubi
1Laboratoire de Génie de l'Eau et de l'Environnement, Faculté des Sciences et Techniques, BP 146, Mohammedia, Morocco. a.aboulhassan@gmail.com
Abstract:
The coagulant iron chloride and the flocculants Polysep 3000 (PO), Superfloc A-1820 (SU) and Praestol 2515 TR (PR) have been used in this study to show the efficiency of coagulation flocculation process in the chemical precipitation method for the removal of organic and colouring matters from the paint industry wastewater. This study also includes the amount of produced sludge. The results indicate that FeCl(3) is efficient at pH range 8-9 and at optimal dose of 650 mgl(-1). Iron chloride allows the removal of 82% of chemical oxygen demand (COD) and 94% of colour. However, sequential addition of coagulant and polymeric additives enhance clearly pollutant removal and produces less decanted sludge compared to the results obtained when the coagulant is used alone. The removal efficiency of COD reaches 91% and that of colour 99%. Coagulation-biflocculation process is more effective than the coagulation-monoflocculation one. The sequential addition of iron chloride, Polysep 3000 (cationic flocculant) and Praestol 2515 TR (anionic flocculant) seems to be the most suitable combination for the treatment of the paint industry wastewaters.
Related Concept Videos
Coagulation
Bioremediation
Biological Treatment of Effluent and Waste Water
Microbial Wastewater Treatment
Extraction: Advanced Methods

