[Simultaneous determination of heavy metal elements in footwear materials by ICP-AES]
Shui-yuan Lü1, Wei Liu, Hua Lin
1Fujian Entry-Exit Inspection and Quarantine Administration, Fuzhou 350001, China.
Abstract:
Footwear materials were treated by the digestion method of carbonization-crack-HNO3-HClO4 dissolution, and the heavy metal elements in these materials were simultaneously determined in the same treated solution. Factors such as the selection of analytical wavelength and the interference of matrix and coexistent elements were studied. The method was secure, convenient, rapid and accurate. The recovery rates of the procedure were between 92.0% and 102.0% with RSDs between 1.0% and 4.6%.
More Related Videos
09:42Fabrication of a Dipole-assisted Solid Phase Extraction Microchip for Trace Metal Analysis in Water Samples
Published on: August 7, 2016
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
Related Concept Videos
Atomic Emission Spectroscopy: Lab
Atomic Emission Spectroscopy: Overview
Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used.
Precipitation and Co-precipitation
