Related Experiment Video
Updated: Aug 7, 2026

Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff
Published on: May 15, 2017
Water localisation and reclamation: steps towards low impact urban design and development
1School of Architecture and Planning, University of Auckland, Private Bag 92019, Auckland, New Zealand. m.vanroon@aukland.ac.nz
Abstract:
Numerous drivers are providing stimulus for increased water cycle localisation within urban neighbourhoods. This paper uses predominantly Australasian case studies to highlight trends, successes and challenges in the transition to neighbourhood centred water-based services using 'Low Impact' and 'Water Sensitive' design and development techniques. Major steps towards urban sustainability are demonstrated, for example, up to 70% reduction in the demand for potable water (Aurora, Melbourne), removal of contaminated stormwater and sewage effluent discharge to natural waterways vulnerable to nutrient or toxin accumulation, and up to 55% of the area of the greenfield site planted in indigenous species (Regis Park, New Zealand). Reduced demand for potable water would enable continued undiluted use of 'pure' water sources from limited bush catchments (Waitakere Ranges, New Zealand), and less dependence on rivers stressed by low flows. Reductions and dispersion of sewage effluent discharges protects receiving waters, such as Port Phillip Bay, Melbourne, from eutrophication. Reduced stormwater discharge favours retention of the natural hydrological regime of rivers and minimises bioaccumulation of toxins in aquatic ecosystems.
Related Concept Videos
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground cistern.
Design Example: Alignment of a Road Line Using GIS
Microbial Wastewater Treatment
Design Example: Maintaining Level of an Embankment
Sustainable Development

