Related Experiment Video
Updated: Aug 7, 2026

Monolayer Contact Doping of Silicon Surfaces and Nanowires Using Organophosphorus Compounds
Published on: December 2, 2013
Doping highly ordered organic semiconductors: experimental results and fits to a self-consistent model of excitonic
Si-Guang Chen1, Paul Stradins, Brian A Gregg
1National Renewable Energy Laboratory, 1617 Cole Boulevard, Golden, Colorado 80401, USA.
Abstract:
An in-depth study of n-type doping in a crystalline perylene diimide organic semiconductor (PPEEB) reveals that electrostatic attractions between the dopant electron and its conjugate dopant cation cause the free carrier density to be much lower than the doping density. Measurements of the dark currents as a function of field, doping density, electrode spacing, and temperature are reported along with preliminary Hall-effect measurements. The activation energy of the current, E(aJ), decreases with increasing field and with increasing dopant density, n(d). It is the measured change in E(aJ) with n(d) that accounts primarily for the variations between PPEEB films; the two adjustable parameters employed to fit the current-voltage data proved to be almost constants, independent of n(d) and temperature. The free electron density and the electron mobility are nonlinearly coupled through their shared dependences on both field and temperature. The data are fit to a modified Poole-Frenkel-like model that is shown to be valid for three important electronic processes in organic (excitonic) semiconductors: excitonic effects, doping, and transport. At room temperature, the electron mobility in PPEEB films is estimated to be 0.3 cm(2)/Vs; the fitted value of the mobility for an ideal PPEEB crystal is 3.4 +/- 2.7 cm(2)/Vs. The modified Poole-Frenkel factor that describes the field dependence of the current is 2 +/- 1 x 10(-4) eV (cm/V)(1/2). The analytical model is surprisingly accurate for a system that would require a coupled set of nonlinear tensor equations to describe it precisely. Being based on general electrostatic considerations, our model can form the requisite foundation for treatments of more complex systems. Some analogies to adventitiously doped materials such as pi-conjugated polymers are proposed.
More Related Videos
08:04Excitonic Hamiltonians for Calculating Optical Absorption Spectra and Optoelectronic Properties of Molecular Aggregates and Solids
Published on: May 27, 2020
11:33All-electronic Nanosecond-resolved Scanning Tunneling Microscopy: Facilitating the Investigation of Single Dopant Charge Dynamics
Published on: January 19, 2018
Related Concept Videos
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
Types of Semiconductors
Debye–Huckel–Onsager Conductance Equation
Carrier Transport
Drift Current:
The drift of charge carriers is started by an external electric field (E). Charged particles, such as electrons and holes, experience an acceleration between collisions with lattice atoms. For electrons, this results in a drift velocity (vd) given by:
Carrier Generation and Recombination
This process is given by the generation rate G and is efficient due to the conservation of momentum between the valence band maximum and conduction band minimum.
Indirect generation involves an...