Effects of electrolytes on adsorbed polymer layers: poly(ethylene oxide)-silica system

The effects of various electrolytes on the adsorption of poly(ethylene oxide) onto silica have been studied. The salts were the chlorides of Na+, Mg2+, Ca2+, and La3+. The methods used were adsorption isotherms, found using a depletion method with phosphomolibdic acid, photon correlation spectroscopy, and solvent relaxation NMR. All the salts increased the particle-polymer affinity and adsorbed amount according to the adsorption isotherms, and a linear relationship was found between the initial slope of the isotherms and the ionic strength of the solution. Final adsorbed amounts were approximately 0.4-0.5 mg m(-2). The polymer layer thicknesses as found by PCS were of the same order as the radius of gyration of the polymer and increased with both the concentration and the valency of the salt due to increased adsorption. Solvent relaxation NMR showed that NaCl is too weak to have a noticeable effect on the polymer train layer, but the divalent salts clearly did increase both the strength of solvent binding close to the silica surface and the amount of PEO required to reach the maximum train density.