Related Experiment Video
Updated: Aug 6, 2026

Precision Milling of Carbon Nanotube Forests Using Low Pressure Scanning Electron Microscopy
Published on: February 5, 2017
Imaging of carbon nanotubes with tin-palladium particles using STEM detector in a FE-SEM
C Probst1, R Gauvin, R A L Drew
1Department of Mining, Metals, and Materials Engineering, McGill University, M.H. Wong Building, 3610 University Street, Montreal, Quebec, Canada H3A 2B2.
Abstract:
Upgraded FE-SEM with STEM detector permits the observation and imaging of thin materials such as carbon nanotubes by transmitted electrons directly in a FE-SEM. It is important to know the resolution of transmitted electrons mode compared to the classical secondary electrons mode. The resolution was measured with SMART macro. This routine permits to quickly determine resolution of a micrograph, based on fast Fourier transform analysis. An optimum working distance value was found around 6mm for an accelerating voltage equal to 10 keV. In addition to this, it was shown that the resolution obtained in bright field and secondary electron images at 15 keV had appreciatively the same resolution. Also, it was shown that images in dark field mode have a poorer resolution compared with bright field transmitted electrons and secondary electrons images.
More Related Videos
10:00Energy Dispersive X-ray Tomography for 3D Elemental Mapping of Individual Nanoparticles
Published on: July 5, 2016
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
Related Concept Videos
Preparation of Samples for Electron Microscopy
Scanning Electron Microscopy
Fundamental Principles
Accelerated...