Related Concept Videos

Clinical Applications of Epidermal Stem Cells01:19

Clinical Applications of Epidermal Stem Cells

Epidermal stem cells (EpiSCs) are mainly located at the basal layer of the epidermis. These cells repair minor injuries of the skin and replace dead skin cells. However, EpiSCs’ cannot heal severe wounds such as major burns or those from diabetes or hereditary disorders. In such cases, culturing the epidermal stem cells from the patient is possible and has yielded successful treatment options, such as laboratory-grown skin grafts. These grafts are synthesized using a patient’s own EpiSCs...
Mortar Joint Deterioration in Masonry01:13

Mortar Joint Deterioration in Masonry

Mortar joint deterioration is a significant concern in masonry structures, with water accumulation in the joints leading to damage from freeze-thaw cycles. The repeated expansion of water during freezing and its melting during thawing develop and propagate cracks in the masonry joints. Eventually, this leads to the spalling of mortar from the joints, loosening masonry units and weakening the structure. The deteriorated mortar joints are also vulnerable to moisture intrusion into the walls.
The...
Masonry in Cold and Hot Weather Conditions01:21

Masonry in Cold and Hot Weather Conditions

In cold weather, masonry construction requires specific precautions to ensure mortar does not freeze before curing, as this can significantly weaken its strength and watertightness. Mortar temperature should be maintained between 60°F and 80°F to support proper hydration and curing. Below 40°F, mortar water must be heated, but should not exceed 120°F as high temperatures can reduce mortar's compressive and bond strength.
Other key practices include keeping masonry units and sand dry and...
Efflorescence in Masonry01:25

Efflorescence in Masonry

Efflorescence in masonry walls appears as a fluffy crystalline powder, often white, resulting from water-soluble salts within the masonry or mortar. When water penetrates the masonry, it dissolves these salts and brings them to the surface, where they are deposited upon evaporation of water.
While initial efflorescence is common post-construction and can be cleaned with water and a brush, in certain instances, efflorescence can reappear and gradually diminish over time as salts are leached out...
Alkali Aggregate Reaction in Concrete01:26

Alkali Aggregate Reaction in Concrete

The alkali-aggregate reaction in concrete involves natural siliceous minerals in aggregates reacting with alkaline hydroxides derived from cement alkalis. This reaction forms an alkali-silica gel that absorbs water, swells, and increases in volume, which is confined by the surrounding cement paste, creating internal pressures that crack and disrupt the concrete. The extent of expansion and damage can be partly attributed to the alkali-silica reaction's osmotic hydraulic pressure and the...
Acid-Catalyzed Ring-Opening of Epoxides02:24

Acid-Catalyzed Ring-Opening of Epoxides

Epoxides that are three-membered ring systems are more reactive than other cyclic and acyclic ethers. The high reactivity of epoxides originates from the strain present in the ring. This ring strain acts as a driving force for epoxides to undergo ring-opening reactions either with halogen acids or weak nucleophiles in the presence of mild acid. The acid catalyst converts the epoxide oxygen, a poor leaving group, into an oxonium ion, a better leaving group, making the reaction feasible. The...