Incorporation of nonionic emulsifiers inside particles in emulsion polymerization: mechanism and methods of...

Emulsion polymerizations of styrene were carried out using two kinds of polyoxyethylene lauryl ether nonionic emulsifiers having different hydrophilic-lipophilic balances (HLB): Emulgen 109P (HLB 13.6); and Emulgen 150 (HLB 18.3). In both cases, incorporation of emulsifier inside polystyrene (PS) particles was clearly observed, as previously reported for the emulsion polymerization of styrene and methacrylic acid using polyoxyethylene nonyl phenyl ether (Emulgen 911, HLB 13.7) nonionic emulsifier. The generality of the incorporation phenomenon of nonionic emulsifier inside polymer particles in emulsion polymerization was clarified. In the case of Emulgen 109P, which is more hydrophobic than Emulgen 150, about 30% of the total amount was incorporated inside the PS particles, higher than for Emulgen 150 (15%). The difference seemed to be ascribed to the difference in the affinities between the nonionic emulsifiers and styrene, which cause the incorporation of emulsifier. On the basis of this idea, suppression of the incorporation was achieved by decreasing the polymerization temperature and the monomer-feed rate. This strongly supports the proposed incorporation mechanism.