Related Experiment Video
Updated: Jul 19, 2026
Evaluation of the Efficacy of Organic Peroxyacids for Eradicating Dairy Biofilms Using an Approach Combining Static and Dynamic Methods
Published on: December 9, 2022
Effectiveness of a glutaraldehyde formulation in decontamination of dental unit water systems
P Gigola1, V Angelillo, G Garusi
1School of Prosthetic Dentistry, Department of Dentistry and Stomatology, University of Brescia, Brescia, Italy.
Aim:
Dental-medical devices may transmit infections caused by bacteria that are usually found in water distribution systems, and which are difficult to treat and control. High bacterial contamination in the water systems of dental units is due to the presence of biofilm inside the pipes. Our study evaluated the efficacy of glutaraldehyde formulated with quarternary ammonium salts (Sanicide T4) examined in a previous study, employing a series of assays to confirm or otherwise the results obtained previously.
Methods:
A purification protocol for the dental unit water system, together with a protocol for daily maintenance treatment, were tested on two dental units (in the Departments of Conservative and Prosthetic Dentistry) taking specimens from the turbine, micro-engine and air-water gun. The chemical substance, at a concentration of 20 cc per litre of water, was allowed to act when the department closed, for a total of 15 days. The Sanicide T4 was handled with protective gloves and the dental units were fitted with two safety devices to avoid accidental ingestion.
Results:
Laboratory results enabled us to compare values for bacterial load at 36 degrees C and at 22 degrees C and for Pseudomonas aeruginosa, before and after applying the test protocol. Data obtained are satisfactory except for Pseudo-monas in the fountain in the Department of Conservative Dentistry; the value was in any case below the safety level set by the American Dental Association, confirming the results obtained in our previous study.
Conclusions:
The two protocols may now be considered an excellent solution to control the development of biofilm. Should the product be found to be effective for a longer period of use, each dental unit should be provided with: an anti-reflux valve to stop accidental ingestion of disinfectant; a hydraulic mechanism to pump the product to the handpieces and other water supply devices; possibility of discriminating the use of the public water system from the use of that in the disinfectant circuit; an automatic mechanism whereby the disinfectant can be flushed out with drinking water every morning.
Related Concept Videos
01:27Chemical Agents for Microbial Control
01:30Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
01:30Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
01:26Physical Methods for Controlling Microbial Growth: Radiation and Filtration
01:23Hand hygiene
Hand washing...
01:29Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...