Intermittent cyclic process for enhanced biological nutrient removal treating combined chemical laboratory wastewater

Pankaj Tanwar1, Tapas Nandy, Rehan Khan

  • 1National Environmental Engineering Research Institute, Nehru Marg, Nagpur, Maharashtra 440 020, India.

Bioresource Technology
|October 31, 2006
PubMed

Related Concept Videos

Biological Treatment of Effluent and Waste Water01:30

Biological Treatment of Effluent and Waste Water

Biological wastewater treatment relies on the metabolic activity of microorganisms to remove pollutants from sewage. In modern treatment systems, this process is organized into sequential stages that progressively reduce solid material, dissolved organic matter, and microbial contamination. Each stage plays a distinct role in improving water quality and preparing the effluent for safe discharge or reuse.Primary and Secondary TreatmentPrimary treatment is a physical process that removes large...
Microbial Wastewater Treatment01:30

Microbial Wastewater Treatment

Microbial communities in aquatic ecosystems play a key role in the natural breakdown of contaminants introduced through domestic and industrial effluents. Acting as biological catalysts, these microbes change and mineralize a wide range of organic and inorganic pollutants under different redox conditions.In oxygen-rich surface waters, aerobic heterotrophs lead organic matter breakdown, using oxygen as the terminal electron acceptor to efficiently oxidize substrates to carbon dioxide and water.
Bioremediation00:46

Bioremediation

Bioremediation is the use of prokaryotes, fungi, or plants to remove pollutants from the environment. This process has been used to remove harmful toxins in groundwater as a byproduct of agricultural run-off and also to clean up oil spills.
Upstream Processing01:27

Upstream Processing

Upstream processing represents a critical phase in biomanufacturing, wherein biological systems such as microorganisms, mammalian cells, or insect cells are cultivated to produce therapeutic proteins, vaccines, enzymes, or other biologically derived products. This phase encompasses all steps from the selection and genetic manipulation of the production organism to the cultivation of cells in bioreactors under tightly controlled environmental conditions.Host Selection and Genetic OptimizationThe...
Bioreactor Design and Operational System01:29

Bioreactor Design and Operational System

Bioreactors are engineered vessels designed to cultivate microorganisms under controlled conditions for industrial bioprocessing. They maintain sterility and allow precise regulation of pH, temperature, oxygen, and nutrient levels to optimize microbial growth and metabolite production. Bioreactors range from small laboratory units of 1 liter to industrial systems holding up to 500,000 liters, though only about 75% of their volume is actively used for fermentation. The remaining headspace...
Fed-Batch Culture01:23

Fed-Batch Culture

Fed-batch culture is a widely used bioprocessing strategy combining aspects of batch culture with controlled substrate feeding to optimize cell growth and product formation. In this semi-closed system, nutrients are strategically added during fermentation, while the accumulated products and biomass remain within the bioreactor until the end of the operation. This controlled addition of substrates allows for better management of growth kinetics, nutrient limitation, and metabolite...