Clinical problem solving: the case of John, Part III

Effective problem-solving consists of two steps: 1. identifying the problem and 2. selecting the appropriate problem-solving strategy (i.e., a plan of action used to find a solution). Humans use four problem-solving strategies:

Water flow in open channels is often measured using hydraulic structures such as weirs, which allow precise calculation of discharge. In a rectangular channel, flow rates are measured using three types of weirs: rectangular sharp-crested, triangular sharp-crested, and broad-crested. The weir head is set at a fixed height above the channel bottom, simplifying calculations and enabling the relationship between depth and flow rate to be analyzed.For the rectangular sharp-crested weir, the flow...

Consider an arbitrary truss structure composed of diagonal, vertical, and horizontal members fixed to the wall. To calculate the force acting on members CB, GB, and GH, method of sections can be used. The loads and lengths of the horizontal and vertical members are known parameters, as shown in the figure.

The volume of a fuel tank mounted on the wing of a jet aircraft can be modeled using the concept of solids of revolution. In this case, the tank is formed by rotating a two-dimensional region, defined by a mathematical function, about the x-axis. The region extends along the axis from zero to two meters, and the resulting three-dimensional shape is symmetric about the axis of rotation. Because the boundary curve lies directly against the axis, the disk method is an appropriate technique for...

Consider a symmetrical roof truss structure, composed of vertical, diagonal, and horizontal members. The length of each horizontal member is 4 m. The lengths of the vertical members FB and HD are 4 m, while the length of member GC is 6 m. The loads acting at joints F, G, and H are 2 kN, while those at joints A and E are 1 kN.

Critical thinking is a cognitive process with several attributes. The attributes of critical thinking include the following: