Related Experiment Video
Updated: Aug 7, 2026

Silicon Metal-oxide-semiconductor Quantum Dots for Single-electron Pumping
Published on: June 3, 2015
High-performance air-stable n-type transistors with an asymmetrical device configuration based on organic
Qingxin Tang1, Hongxiang Li, Yaling Liu
1Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100080, People's Republic of China.
Abstract:
High-performance air-stable n-type field-effect transistors based on single-crystalline submicro- and nanometer ribbons of copper hexadecafluorophthalocyanine (F(16)CuPc) were studied by using a novel device configuration. These submicro- and nanometer ribbons were synthesized by a physical vapor transport technique and characterized by the powder X-ray diffraction pattern and selected area electron diffraction pattern of transmission electron microscopy. They were found to crystallize in a structure different from that of copper phthalocyanine. These single-crystalline submicro- and nanometer ribbons could be in situ grown along the surface of Si/SiO(2) substrates during synthesis. The intimate contact between the crystal and the insulator surface generated by the "in situ growing process" was free from the general disadvantages of the handpicking process for the fabrication of organic single-crystal devices. High performance was observed in devices with an asymmetrical drain/source (Au/Ag) electrode configuration because in such devices a stepwise energy level between the electrodes and the lowest unoccupied molecular orbital of F(16)CuPc was built, which was beneficial to electron injection and transport. The field-effect mobility of such devices was calculated to be approximately 0.2 cm(2) V(-)(1) s(-)(1) with the on/off ratio at approximately 6 x 10(4). The performances of the transistors were air stable and highly reproducible.
More Related Videos
09:20Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology
Published on: December 7, 2015
08:50Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication
Published on: November 28, 2017
Related Concept Videos
Bipolar Junction Transistor
The structure...
Configurations of BJT
The common base configuration is noted for its high voltage gain, positioning it as an ideal choice for single-stage amplifier circuits, such as microphone pre-amplifiers. A notable characteristic of...
Field Effect Transistor
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the gate...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity arises...