Plastic reference electrodes and plastic potentiometric cells with dispersion cast poly(3,4-ethylenedioxythiophene)...

A simple procedure of preparing low cost, planar and disposable reference electrodes for potentiometric applications is presented. This method is essentially the same as used for obtaining all-plastic ion-selective electrodes and thus promising for simple fabrication of complete cells. Commercially available aqueous dispersion of poly(3,4-ethylenedioxythiophene) doped by poly(4-styrenesulfonate) ions (PEDOT-PSS, Baytron P) is simply cast on a non-conducting plastic support (transparent foil for laser printers). This layer is covered by a non-selective poly(vinyl chloride) based membrane containing solid AgCl and KCl, added to obtain a stable potential. The conducting polymer layer plays a double role, of electrical contact and ion-to-electron transducer, enhancing the potential stability. The reference electrodes obtained exhibit independence of the kind and concentration of electrolyte applied as well as very low sensitivity to interferences: redox reactants and H+ ions; they are also characterized by both potential stability and low polarisability, sufficient for potentiometric applications. Cells of plastic electrodes (indicator and reference ones) are tested using an arrangement with Pb2+ or Ca2+ selective sensors. Potentiometric characteristic of such cells is satisfactory, well comparable with that using a classical electrode arrangement.