Related Experiment Video
Updated: Jul 18, 2026

Experimental Column Setup for Studying Anaerobic Biogeochemical Interactions Between Iron (Oxy)Hydroxides, Trace Elements, and Bacteria
Published on: December 19, 2017
Use of caustic magnesia to remove cadmium, nickel, and cobalt from water in passive treatment systems: column
Tobias Stefan Rötting1, Jordi Cama, Carlos Ayora
1Institute of Earth Sciences Jaume Almera, CSIC, Lluis Solé i Sabarís s/n, 08028 Barcelona, Spain. troetting@ija.csic.es
Abstract:
In the present study caustic magnesia obtained from calcination of magnesium carbonate was tested in column experiments as an alternative material for passive remediation systems to remove divalent metals. Caustic magnesia reacts with water to form magnesium hydroxide, which dissolves increasing the pH to values higher than 8.5. At these pH values, cadmium is precipitated as otavite and to a minor amount as a hydroxide. Cobalt and nickel are precipitated as hydroxides which form isostructural solids with brucite. Thus, metal concentrations as high as 75 mg/L in the inflowing water are depleted to values below 10 microg/L. Magnesia dissolution is sufficiently fast to treat flows as high as 0.5 m3/m2 x day. For reactive grain size of 2-4 mm, the column efficiency ends due to coating of the grains by precipitates, especially when iron and aluminum are present in the solution.
More Related Videos
11:14Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
Related Concept Videos
Qualitative Analysis
For instance, group IV...
Factors Affecting Solubility
Washing, Drying, and Ignition of Precipitates
Controlled-Current Coulometry: Overview
Coagulation
Ion Exchange