Reduction and solution of the chemical master equation using time scale separation and finite state projection

Slaven Peles1, Brian Munsky, Mustafa Khammash

  • 1Department of Mechanical Engineering, University of California-Santa Barbara, Santa Barbara, CA 93106-5070, USA.

Related Concept Videos

Optimizing Chromatographic Separations01:15

Optimizing Chromatographic Separations

Optimizing chromatographic separations is crucial for obtaining clean separations in a minimum amount of time. Optimization is required for several factors, including kinetic effects related to band broadening, plate height, capacity factor, and separation factor.
Band broadening refers to spreading solute bands as they travel through the column. This broadening can impact resolution. Plate height (H) represents the length required for one theoretical plate. A lower plate height corresponds to...
Reaction Mechanisms: Rate-limiting Step Approximation01:29

Reaction Mechanisms: Rate-limiting Step Approximation

The rate-determining step, or RDS, in a chemical reaction is the slowest step that determines the overall reaction rate. It is identified by using the observed rate law and typically involves approximation methods like the RDS approximation or the steady-state approximation.In the RDS approximation, also known as the rate-limiting-step or equilibrium approximation, the reaction mechanism consists of one or more reversible reactions near equilibrium, followed by a slower RDS, and then one or...
Reaction Mechanisms: The Steady-State Approximation01:26

Reaction Mechanisms: The Steady-State Approximation

The steady-state approximation, also referred to as the quasi-steady-state approximation to differentiate it from a true steady state, is a widely used method for simplifying calculations in complex reaction mechanisms. This approach is particularly useful when dealing with multi-step reactions that involve reverse reactions or several steps, which can significantly increase mathematical complexity and make the reactions nearly unsolvable analytically.The steady-state approximation operates on...
Fast Reactions01:27

Fast Reactions

Fast reactions occurring in times shorter than the time needed to mix reactants pose a unique challenge for investigation. In a liquid-phase continuous-flow system, reactants A and B are swiftly pushed into the mixing chamber, where mixing occurs within 1 ms. The reaction mixture then flows through an observation tube, and one measures light absorption to determine species concentrations at various points of the tube. This method is most appropriate when relatively large volumes of reactants...
Transfer Function to State Space01:23

Transfer Function to State Space

State-space representation is a powerful tool for simulating physical systems on digital computers, necessitating the conversion of the transfer function into state-space form. Consider an nth-order linear differential equation with constant coefficients, like those encountered in an RLC circuit. The state variables are selected as the output and its n−1 derivatives. Differentiating these variables and substituting them back into the original equation produces the state equations.
In an RLC...
Linear Approximation in Time Domain01:21

Linear Approximation in Time Domain

Nonlinear systems often require sophisticated approaches for accurate modeling and analysis, with state-space representation being particularly effective. This method is especially useful for systems where variables and parameters vary with time or operating conditions, such as in a simple pendulum or a translational mechanical system with nonlinear springs.
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length, the...