Ammonia recovery from anaerobically digested cattle manure by steam stripping

Ammonia recovery from anaerobically digested cattle manure effluents through steam stripping was studied at a stripping tower temperature of 98-99 degrees C and a steam-water ratio approximately 56-72 g/L. The digested manure effluents were first treated by microfiltration and then the permeate was used as feed in steam stripping. The stripping performance was evaluated under different feed pH values, ammonia concentrations and temperatures. The increase of the initial feed pH does not significantly improve ammonia stripping efficiency due to the fact that the stripped effluent pH is increased during steam stripping. This suggests that steam stripping of anaerobically digested manure effluents for ammonia recovery may not need pre-raised pH. In contrast, the pH value of the synthetic ammonia wastewater containing NH4Cl dramatically decreases after steam stripping. Increasing the feed temperature slightly improves ammonia stripping efficiency, but reduces the concentration of the recovered ammonia in the condensate due to an increased condensate volume at a higher feed temperature. Therefore, the feed temperature should be controlled at an optimum point that can compromise the condensate ammonia concentration and the ammonia stripping efficiency. Experimental results indicate that recovery of ammonia from anaerobically digested cattle manure effluents as NH4OH is technically feasible.