Mechanical properties of elastin along the thoracic aorta in the pig

Understanding the mechanical environment of each component within the arterial wall is fundamental for understanding vascular growth and remodelling and for engineering artificial vascular conduits. We have investigated the mechanical status of arterial elastin by measuring the circumferential mechanical properties of purified elastin as function of position along the descending thoracic aorta of the pig. The tensile circumferential secant modulus, E(sec), measured in uniaxial mechanical tests, increased 30% (P<0.001), from a value of 0.88 MPa in the proximal tissue near the aortic arch to 1.14 MPa in the distal tissue near the diaphragm, indicating the stiffness of the elastin sample increased with position. Breaking stress was 54% higher in the distal tissue compared to the proximal (P<0.001), but the breaking stretch ratio did not change. E(sec) correlated with the ratio of radius to wall thickness measured in the no load state, r(nl)/h(nl), suggesting that the rise in stiffness was linked to ring morphology. The higher stiffness and strength of the distal tissue might be explained by a higher proportion of circumferentially oriented fibres in the distal tissue, which would indicate that the elastin meshwork in the thoracic aorta may become progressively anisotropic with distance from the heart. The ratio r(nl)/(h(nl)E (sec))rose only 7%, which suggests that the in vivo circumferential strain on the elastin may be constant along the pig thoracic aorta. The positional variation in elastin's properties should be taken into account in mechanical studies on purified elastin and in mathematical models of aorta mechanics.