Related Experiment Video
Updated: Jul 17, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Cesium uptake from aqueous solutions by bentonite: a comparison of multicomponent sorption with ion-exchange models
1Department of Analytical Chemistry and Material Testing, VSB-Technical University Ostrava, 17 listopadu 15, 708 33 Ostrava-Poruba, Czech Republic. zdenek.klika@vsb.cz
Abstract:
The removal of cesium from concentrated aqueous solutions into Ca/Mg-bentonite for a wide range of bentonite-to-water (m/V) ratios was studied experimentally and theoretically. Using the batch technique, the equilibrium of Cs uptake was measured. The nonlinear character of cesium sorption substantially influenced by the m/V ratio was observed. The experimental data were evaluated using the multicomponent Langmuir isotherm and an ion-exchange model based on the ion-exchange reaction between Cs+ and M2+ (Ca2+/Mg2+) initially sorbed on bentonite. Constants k1,Cs = 0.521 mmol.g-1, k2,Cs = 968 L.mol-1, and k2,M = 592 L.mol-1 were obtained for Cs uptake described by multicomponent Langmuir isotherm. For the ion-exchange model, the thermodynamic equilibrium constant K = 75.5 mL.g-1 with a standard deviation of sK = 17.4 mL.g-1 was determined. Using the t test, the calculated data of multicomponent Langmuir and ion-exchange isotherms were fit to experimental data, and the best agreement was obtained for the ion-exchange model. The results show that Cs uptake by bentonite could be substantially decreased in systems with a high bentonite-to-water (m/V) ratio as a consequence of the presence of desorbed divalent cations in the liquid phase.
Related Concept Videos
Ion-Exchange Chromatography
Ion Exchange
Factors Affecting Solubility
Adsorption Isotherms II
Precipitation of Ions
The equation that describes the equilibrium between solid calcium carbonate and its solvated ions is:
Common Ion Effect

