Related Experiment Video
Updated: Jul 17, 2026

A Modeling and Simulation Method for Preliminary Design of an Electro-Variable Displacement Pump
Published on: June 1, 2022
Failure mode effect analysis applied to the use of infusion pumps
Richard J Fechter1, Julio J Barba
1Clinical Engineering Department, University of California, San Francisco, CA, USA.
Abstract:
Failure Mode Effect Analysis (FMEA) offers a prospective approach to reducing the risk associated with health care delivery. Beginning in February, 2002, an interdisciplinary team of fifteen individuals, including end-users, conducted an FMEA for the use of infusion pumps at UCSF Medical Center. The use of infusion pumps was identified as the area of highest risk, based on incident report data. The team identified sixteen potential failure modes, including their potential effects and causes, and assigned a risk priority number to each based on the potential severity, probability, and detectability of the failure. Notable failure modes included: incorrect programming; improper or inconsistent labeling of solution, tubing, and pump; potential use of malfunctioning or damaged pumps; and incorrect programming by nurses related to device design. The team then broke into smaller work groups and invited more end-users to perform root cause analyses and suggest recommended actions/outcome measures for each failure mode with a risk priority number of 32 or higher (on our scale of 1 to 64). Finally, the FMEA team assembled all of the data, prepared a final report, and assigned responsibility for key recommended actions.
Related Concept Videos
One-Compartment Model: IV Infusion
The one-compartment model for IV infusion uses mathematical equations to describe the rate of change in drug quantity in the body. At steady-state or infusion equilibrium, the drug input...
Impact of Pharmacokinetic–Pharmacodynamic Models: Regulatory Decisions
Two-Compartment Open Model: IV Infusion
The model illustrates the decrease in plasma drug concentration from the central compartment with a specific equation. It shows that under steady-state conditions, the drug's input rate...
Drug Accumulation During Multiple Dosing: Intermittent IV Infusions
Determination of Multiple Dosing Parameters: Steady-State, Minimum and Maximum Concentrations
One-Compartment Open Model for IV Bolus Administration: General Considerations
The drug's presence in the body is defined by an equation representing the difference between the rates of drug entry and exit. Key parameters—elimination rate constant, half-life,...
