Experimental study of 3D contactless conductivity detection using microwave radiometry: a possible method for...

The capability of detecting electrical conductivity variations using focused microwave radiometry, a method used in clinical applications for temperature distribution imaging of subcutaneous tissues, is discussed in the present study. A novel microwave radiometric system operating at 3.5 GHz, including an ellipsoidal conductive wall cavity, which provides the required beamforming and focusing, is developed. The system is capable of providing distribution measurements of the product of conductivity and temperature of any object being at a temperature above the absolute zero. The implemented experimental procedure is based on the results of an electromagnetic numerical analysis using a semianalytical method which was developed in order to compute the focusing properties of the ellipsoidal reflector. Each measurement is realized by placing the region of interest in the area of the first focus of the cavity and collecting the radiation converged at the second by an almost isotropic dipole antenna connected to a sensitive radiometer. Experimental data from cylindrical shaped saline or de-ionized water filled tank phantoms in which saline solutions of different concentrations were infused, provide promising results concerning the system's ability of detecting conductivity variations. Future research is needed in order to elucidate the potential of the proposed methodology to be used for brain conductivity measurements.