Related Experiment Video
Updated: Jul 17, 2026
Low-Dose Gamma Radiation Sterilization for Decellularized Tracheal Grafts
Published on: April 14, 2023
Effect of re-sterilization of surgical sutures by ethylene oxide
Prem Anand Nagaraja1, Devi Shetty
1Narayana Hrudayalaya, Bommasandra Industrial Area, Anekal Taluk, Bangalore, Karnataka, India. dr.prem@indiatimes.com
Background:
Surgical suture packs are opened (and external packaging removed) on the operating table prior to surgery. Some of these suture packs may not be used in the surgery for reasons of inappropriateness or change in the surgical technique or following accidental contact with a non-sterile surface. These unused sutures with their foil packs still unopened are sometimes re-sterilized using ethylene oxide to allow for reuse. This re-sterilization of unopened suture packs can be contentious, due to legislation and health regulations in developed countries. The purpose of the present paper was to measure the effect of such repeated gas sterilization on sutures.
Methods:
The knot tensile strength was measured for new sterile sutures and ethylene oxide re-sterilized sutures. The tests were conducted on two available brands of sutures, including both absorbable and non-absorbable synthetic sutures.
Results:
No statistically significant difference was observed in the tensile strengths between the two sets of sutures, before and after re-sterilization. Some foil packs showed slight crimping after re-sterilization, but remained intact. No humidity was observed inside the foil packs.
Conclusions:
Re-sterilization of unused suture foil packs can be carried out without loss of tensile strength.
Related Concept Videos
01:30Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
01:29Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
01:30Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
01:27Chemical Agents for Microbial Control