Adsorption of fluoride in aqueous solutions using KMnO4-modified activated carbon derived from steam pyrolysis of...

Fluoride in drinking water above permissible levels is responsible for human and skeletal fluorosis. In this study, activated carbons (AC) prepared by one-step steam pyrolysis of rice straw at 550, 650, 750 degrees C, respectively, were modified by liquid-phase oxidation using HNO3, H2O2 and KMnO4. Characterization of these 12 carbons was made by their surface area, porosity, acidity, basicity, pH(pzc), pH and ability to remove fluoride anion. Based on the data of the latter factor, the RS2/KMnO4 carbon was selected. Along with batch adsorption studies, which involve effect of pH, adsorbate concentration, adsorbent dosage, contact time, temperature, and Co-ions (SO4(2-), Cl-, Br-). The effects of natural organic matter (NOM) were also made to remove the fluoride from natural water. On the basis of kinetic studies, specific rate constants involved in the adsorption process using RS2/KMnO4 carbon was calculated and second-order adsorption kinetics was observed. Equation isotherms such as Langmuir (L), Freundlich (F), Langmuir-Freundlich (LF) and Dubinin-Radushkevich (DR) were successfully used to model the experimental data. From the DR isotherm parameters, it was considered that the uptake of F- by RS2/KMnO4 carbon proceeds by an ion-exchange mechanism (E=10.46 kJ mol(-1)). The thermodynamic parameters of fluoride sorption were calculated and the sorption process was chemical in nature. The ability of RS2/KMnO4 to remove F- from Egyptian crude phosphoric acid (P(2)O(5)=48.42%) was tested and the adsorption capacity of F- in H(3)PO(4) was greater than that in distilled water. This is may be due to fluoride adsorption enhanced at lower pH of crude acid.