Transmission mode ion/ion electron-transfer dissociation in a linear ion trap

Two related methods for effecting electron-transfer dissociation (ETD) are described that involve either the storage of analyte cations in a linear ion trap while reagent anions are transmitted through the cations or storage of the reagent anions with transmission of the analyte cations. In the former approach, the ETD products are captured and stored in the linear ion trap for subsequent mass analysis. In the latter approach, the ETD products pass through the linear ion trap and must be collected or directly mass-analyzed by an external device. In the present study, another linear ion trap is placed in series with the ion trap where the ion/ion reaction was employed. A pulsed dual ion source approach coupled with a hybrid triple quadrupole/linear ion trap instrument was used to illustrate these methods. The two approaches give similar results in terms of the identities and relative abundances of the ETD products. Under optimum conditions, the two approaches also give comparable extents of ion/ion reactions for the same reaction time. Also, conversions of precursor ions to product ions over the same reaction time are similar to those noted for experiments in which ions of both polarities are stored simultaneously. These approaches, therefore, provide expanded experimental options for the use of ETD. An advantage of transmission mode experiments that they hold over mutual storage mode experiments is that they do not require that any specialized measures be taken to enable the simultaneous storage of oppositely charged ions.