Porous imprinted polymer membranes prepared by phase separation in compressed liquid CO2

Phase separation of poly(acrylonitrile-co-methacrylic acid) in compressed liquid CO(2) resulted in formation of a porous imprinted membrane which preferentially adsorbed uracil (URA). The cross-section of the membrane was observed by SEM, which revealed its porous structure. The mechanical strength of the membrane indicated formation of a rigid matrix with high tensile strength (4.4 N mm(-2)). The imprinted membranes bound highly selectively to URA (12.8 micromol g(-1)) but binding to dimethyluracil (DMURA), thymine, and cytosine was less (0.7, 0.8, and 0.9 micromol g(-1), respectively). When DMURA was similarly used to prepare an imprinted membrane in liquid CO(2) there was less binding of DMURA to the imprinted membrane obtained. The URA-imprinted membranes were evaluated by IR spectroscopy before and after URA extraction. The results indicated that hydrogen bonding was the mechanism of binding of URA to the imprinted membrane. Competitive binding studies were performed with binary mixtures of URA and its analogues. The URA-imprinted membrane enabled good separation of URA from cytosine, DMURA, and thymine, with separation factors of 3.0, 3.8, and 2.5, respectively. It was confirmed that the compressed liquid CO(2) contributed to efficient formation of template substrate sites in the URA-imprinted membrane.