Grinding and sieving soil affects the availability of organic contaminants: a kinetic analysis

Field contaminated soils are often homogenized before application in bioassays and chemical assays that estimate the (bio)availability of their contaminants. The homogenization of the soil might affect the availability, and thereby the outcome of a bioassay might not reflect field situations. In this study, uptake kinetics of polycyclic aromatic hydrocarbons (PAH) by a negligible depletive passive sampler exposed to a ground and non-ground field contaminated soil were tested. The measurements illustrate how freely dissolved pore water concentrations of contaminants can be affected by soil treatment. It took more than a month, and over a year to reach steady state in the passive sampler exposed to the ground and non-ground soil, respectively. The uptake rate seemed to be limited by desorption from the soil, even though the fiber only extracted 0.2% of the soil-sorbed PAH at maximum. If these observations are translated to the field situation, where contaminants are not homogeneously distributed and disappear by (bio)degradation or physical transport processes, it is unlikely that pore water concentrations are solely determined by a thermodynamic equilibrium. Hence, exposure of organisms in these soils cannot always be estimated by sorption studies and an equilibrium partitioning approach.