Related Experiment Video
Updated: Jul 15, 2026

Separation of Aldehydes and Reactive Ketones from Mixtures Using a Bisulfite Extraction Protocol
Published on: April 2, 2018
[Separation and purification of Al13 by chemical precipitation and metathesis]
Guo-Hong Li1, Bao-You Shi, Dong-Sheng Wang
1State Key Laboratory of Environmental Aquatic Chemistry, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, China.
Abstract:
PACls with different concentrations were prepared by adding sodium carbonate powder into AlCl13 solution. Medium concentration and high Al13 content of PACl was chosen to carry out Al13 separation processes. The influences of SO4/Al molar ratio and the initial total Al concentration on the precipitation reactions of sulfate with different Al species were investigated. The factors influencing the metathesis reaction between solid Al13-SO4 and Ba(NO3)2 were evaluated. Results showed that high Al13 PACl could be obtained at the medium high concentration range of 0.4 - 0.6 mol/L, the optimum SO4/Al ratio was 0.6:1 for precipitation- separation of Al13, Al13 -SO4 precipitates were mostly consisted of tetrahedral crystals. During the metathesis reaction, Ba/SO4 molar ratio of 1:1 is the optimal value. Small range temperature variation and ultrasonic action had no marked influence on metathesis reaction rate and final Al13 concentration. Higher initial Ba(NO3)2 concentration could produce higher concentration Al13 accordingly. The purity of Al13 solution could be reached to 92.1% statistically.
More Related Videos
Related Concept Videos
Washing, Drying, and Ignition of Precipitates
Precipitation and Co-precipitation
Extraction: Advanced Methods
Precipitation Processes
Precipitation of Ions
The equation that describes the equilibrium between solid calcium carbonate and its solvated ions is:
Colloidal precipitates

