Application of a quantitative carrier test to evaluate microbicides against mycobacteria

Microbicides for reprocessing heat-sensitive medical devices, such as flexible endoscopes, must be mycobactericidal to reduce the risk of nosocomial infections. Suspension test methods currently used for efficacy evaluation lack the stringency required for assessing inactivation of mycobacteria on surfaces. The quantitative carrier test method reported here is based on mycobacteria-contaminated reference carrier disks of brushed stainless steel. Each disk was contaminated with 10 microL of a suspension of Mycobacterium terrae containing a soil load. Each disk with a dried inoculum was placed in a glass or Teflon vial, and then overlaid with 50 microL of the test formulation or 50 microL saline for the control carriers. Five test and 3 control disks were used in each run. At the end of the contact time, each vial received 9.95 mL neutralizer solution with 0.1% Tween-80 to stop the reaction and perform the initial microbicide dilution. The inoculum was eluted by mixing on a Vortex mixer for 60 s, and the eluates and saline used to subsequently wash the vials and the funnels were membrane-filtered. Filters were placed on plates of Middlebrook 7H11 agar and incubated at 37 degrees C for at least 30 days before colonies were counted and log10 reductions were calculated in colony-forming units. Tests with a range of commercially available products, having claims against mycobacteria, or believed to be broad-spectrum microbicides, showed that the method gave reproducible results. Products used included oxidizing agents (sodium hypochlorite and an iodophore), a phenolic, a quaternary ammonium compound, and ortho-phthalaldehyde. This method represents a much more realistic evaluation than the currently used quantitative suspension test method for the evaluation of mycobactericidal formulations for registration and, when performed at different product concentrations, allows an assessment of any safety margin or risks in using the test formulation in the field.