Performance of industrial by-products in controlled low-strength materials (CLSM)

As the construction industry continues to recognise the importance of sustainable development, technologies such as controlled low-strength material (CLSM) have come to the forefront as viable means of safely and efficiently using by-product and waste materials in infrastructure applications. CLSM, also known as flowable fill, can be defined as an engineered backfill material containing fine aggregates, Portland cement, water and a by-product material. CLSM can provide an economically and technically feasible alternative to conventional fill materials because of potential cost savings related to its unique and often superior technical properties. In this present experimental study, three industrial by-products, namely fly ash (FA), rice husk ash (RHA) and quarry dust (QD), were used as constituent materials in CLSM. Mixture proportions were developed for CLSM containing these industrial by-products and were tested in the laboratory for various properties, such as flowability, unconfined compressive strength (UCS), stress-strain behaviour, density, water absorption and volume changes. Comparison between the two pozzolanic materials, namely FA and RHA, for their potential to produce an effective CLSM has been made. It can be observed from the results that by-product materials such as FA, RHA and QD can be successfully used in CLSM. This successful utilization of by-product materials is important to sustainable development and is the focus of this research.