Related Experiment Video
Updated: Jul 13, 2026
A Facile and Eco-friendly Route to Fabricate Poly(Lactic Acid) Scaffolds with Graded Pore Size
Published on: October 17, 2016
Selective laser sintering of porous tissue engineering scaffolds from poly(L: -lactide)/carbonated hydroxyapatite
Wen You Zhou1, Siu Hang Lee, Min Wang
1Department of Mechanical Engineering, The University of Hong Kong, China.
Abstract:
This study focuses on the use of bio-nanocomposite microspheres, consisting of carbonated hydroxyapatite (CHAp) nanospheres within a poly(L: -lactide) (PLLA) matrix, to produce tissue engineering (TE) scaffolds using a modified selective laser sintering (SLS) machine. PLLA microspheres and PLLA/CHAp nanocomposite microspheres were prepared by emulsion techniques. The resultant microspheres had a size range of 5-30 microm, suitable for the SLS process. Microstructural analyses revealed that the CHAp nanospheres were embedded throughout the PLLA microsphere, forming a nanocomposite structure. A custom-made miniature sintering platform was installed in a commercial Sinterstation((R)) 2000 SLS machine. This platform allowed the use of small quantities of biomaterials for TE scaffold production. The effects of laser power; scan spacing and part bed temperature were investigated and optimized. Finally, porous scaffolds were successfully fabricated from the PLLA microspheres and PLLA/CHAp nanocomposite microspheres. In particular, the PLLA/CHAp nanocomposite microspheres appeared to be promising for porous bone TE scaffold production using the SLS technique.
