Related Experiment Video
Updated: Jul 13, 2026

The Portable Chemical Sterilizer (PCS), D-FENS, and D-FEND ALL: Novel Chlorine Dioxide Decontamination Technologies for the Military
Published on: June 29, 2014
Control of disinfection and halogenated disinfection byproducts by the electrochemical process
1Department of Environmental Engineering, YIEST, Yonsei University, 234 Maeji, Heungup, Wonju city, Gangwon, South Korea.
Abstract:
The aim of this study was to investigate some aspects of the performance of electrochemical process as an alternative disinfection strategy, while minimising DBPs, for water purification. The study of electrochemical processes has shown free chlorine to be produced, but smaller amounts of stronger oxidants, such as ozone, hydrogen peroxide and OH radicals (*OH), were also generated. The formation of mixed oxidants increased with increasing electric conductivity, but was limited at conductivities greater than 0.6 mS/cm. Using several microorganisms, such as E. coli and MS2 bacteriophage, inactivation kinetic studies were performed. With the exception of free chlorine, the role of mixed oxidants, especially OH radicals, was investigated for enhancement of the inactivation rate. Additionally, the formation and reduction of DBPs was studied by monitoring the concentration of haloacetic acids (HAAs) during the process.
More Related Videos
Related Concept Videos
Chemical Agents for Microbial Control
Electrolysis
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Microbial Bioremediation of Pesticides
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...

