Design of a DSP-based instrument for real-time classification of pulmonary sounds
Sameer Alsmadi1, Yasemin P Kahya
1Institute of Biomedical Engineering, Boğaziçi University, 34342 Bebek, Istanbul, Turkey.
Abstract:
Auscultation of pulmonary sounds provides valuable clinical information but has been regarded as a tool of low diagnostic value due to the inherent subjectivity in the evaluation of these sounds. In this work, a Digital Signal Processor is used to design an instrument capable of acquiring, parameterizing and subsequently classifying lung sounds into two classes with an aim to evaluate them objectively in real time. The instrument operates on sound signal from a chest microphone and flow signal from a pneumotachograph. The classification is carried out separately on the 12 reference libraries (pathological and healthy) of six sub-phases of a full respiration cycle and the results are combined to arrive at a final decision. The k-nearest neighbour and minimum distance classifiers with different distance metrics have been implemented in the instrument. The instrument was tested in the clinical environment, attaining 96% accuracy in real-time classification.
Related Concept Videos
01:30Classification of Signals
A continuous-time signal holds a value at every instant in time, representing information seamlessly. In contrast, a discrete-time signal holds values only at specific moments, often denoted as x(n), where...
01:23Design Example
01:30Equipments Used To Measure Blood Pressure
This invasive approach involves cannulating a peripheral artery. During each cardiac contraction, pressure generates mechanical motion within the catheter, transmitted through rigid, fluid-filled tubing to a transducer. This transducer converts mechanical motion into electrical signals displayed as waveforms on a monitor. An automatic flushing system prevents blood backflow. Due to the potential risk of unexpected arterial blood loss, this method is primarily used in intensive...
01:15Heart Sounds
Auscultation is the process of listening to these internal body sounds using a stethoscope. The heart produces four types of sounds, but only two—S1 and S2—can usually be heard with a stethoscope.
S1, also known as the "lub" sound, is caused by the closure of atrioventricular (A-V) valves at the...
01:17Design Example: Vintage Mixing Console
The specifications for the pre-amplifier were clear. It needed to amplify the audio signal by a factor of 10, have an input impedance above 10...