Preparative steps necessary for the accurate measurement of malondialdehyde by high-performance liquid chromatography

The need for a more specific, reliable, and reproducible technique for the measurement of malondialdehyde (MDA) has prompted modifications of currently available methods based on the formation and recovery of the complex between MDA and thiobarbituric acid (TBA). To 500 microliters of plasma or to 300 mg of liver homogenate, 2 ml of H2O and 500 microliters of 0.5% butylated hydroxytoluene in methanol were added to prevent further formation of MDA. Precipitation of proteins carried out with 200 microliters of 0.66 N H2SO4 and 150 microliters of 10% Na2WO4 (w/v) led to complete recovery of the MDA standard. Maximum formation of the MDA-TBA complex was obtained by adjusting the pH between 2.5 and 4.5 and heating the MDA-TBA mixture at 100 degrees C for 60 min. Extraction of the MDA-TBA complex was a critical step and proved complete with n-butanol at pH less than 0.75. It was then evaporated at 37 degrees C under nitrogen. The MDA-TBA complex solubilized in H2O was shown to be stable for at least 7 days. These preparative steps led to the detection of a single peak that on spectral analysis was identified as pure MDA-TBA. This procedure offers several advantages in terms of specificity, recovery, and reproducibility.