Evaluation of inverse anaerobic fluidized bed reactor for treating high strength organic wastewater

The aim of this work is to evaluate the feasibility of an inverse fluidized bed reactor for the anaerobic digestion of distillery effluent, with a carrier material that allows low energy requirements for fluidization, providing also a good surface for biomass attachment and development. Inverse fluidization particles having specific gravity less than one are carried out in the reactor. The carrier particles chosen for this study was perlite having specific surface area of 7.010 m2/g and low energy requirements for fluidization. Before starting up the reactor, physical properties of the carrier material were determined. One millimeter diameter perlite particle is found to have a wet specific density of 295 kg/m3. It was used for the treatment of distillery waste and performance studies were carried out for 65 days. Once the down flow anaerobic fluidized bed system reached the steady state, the organic load was increased step wise by reducing hydraulic retention time (HRT) from 2 days to 0.19 day, while maintaining the constant feed of chemical oxygen demand (COD) concentration. Most particles have been covered with a thin biofilm of uniform thickness. This system achieved 84% COD removal at an organic loading rate (OLR) of 35 kg COD/m3/d.